Replacing Interior parts on TJ full doors

[MudDoggy33]

I know this project will be a pain in the butt but is it doable for your average home garage guy? I'm trying not to spend money at the dealership to do this.

Tom

[MechanicalMayham]

I am uncertain as to what you refering to? Are you replacing the door panels, or just parts like the pull straps or window cranks that may have busted from use.

[MudDoggy33]

Whoops my bad. All the internal working parts. Rods, latches, etc.

[Bada-Bing.]

Sure, tear it apart and re-assemble it on your own. If you can't then have someone else fix your mistakes

[MechanicalMayham]

Just remember this, if it doesn't come loose easily, you have missed something. Do not force anything to free. The panel is easy enough to remove, I would suggest getting a body panel tool, forked piece of metal to pry out plastic trim tabs, aka chrismas trees.
A good pair of pliers and some good screwdrivers will be benificial. Never ripped the inner skins outta my heep but my trucks was fairly straight forward.

[MudDoggy33]

Yea I have the old panels off and just looking around there isn't much room. I bought them up in Allentown, got them repainted at the college I go to and they got me stuck in the Jeep. I was climbing out the back window LOL. I was livid when they screwed them all up. Thanks for the advice though guys I'll keep it in mind.

[1990JPYJ]

I had the same problem when i got mine. all i did was replace the handle and oiled the latch and its all better now. i think it took me about 45 min and $20 in parts. good luck